Compact thermal fluid systems designed to provide process temperature control up to 550°F, utilizing oil based heat transfer fluids. The WM series is the closest HEAT comes to a “standard” system. WM Series hot oil systems include an electric heater, centrifugal pump with a water cooled mechanical seal, expansion tank, and a control panel all mounted on a drip proof base. Our WMS series is equipped with a parallel cooling circuit.
Unit of Measure
Specifications
Output (kW) |
N/A 27 |
Output (BTU/hr) |
N/A 92124 |
Operating Voltage |
N/A 480, 3 Phase |
Total Amps |
N/A 36 |
Heating Capacity (BTU/hr) |
N/A |
Centrifugal Pump: Manufacturer |
N/A |
Centrifugal Pump: Model |
N/A |
Centrifugal Pump: Motor Type |
N/A |
Centrifugal Pump: gpm |
N/A |
Centrifugal Pump: hp |
N/A |
Centrifugal Pump: Total Deliver Head (ft) |
N/A |
Centrifugal Pump: Seal |
N/A |
Centrifugal Pump: Seal Cooling |
N/A |
Piping Connection (150# Flange) |
N/A |
Piping Connection (300# flange) |
N/A |
Expansion Tank: Size (gal) |
N/A 10 |
Expansion Tank: Line Size (in) |
N/A 3/4 |
Expansion Tank: Vent to Atmosphere |
N/A |
Expansion Tank: Inert Gas Blanketing |
N/A |
Expansion Tank: Sight Glass |
N/A |
Expansion Tank: ASME Code |
N/A |
Expansion Tank: Relief Valve |
N/A |
Heater: Maximum Operating Temperature (° F) |
N/A |
Heater: Maximum Operating Pressure (psig) |
N/A |
Heat Exchange Surface Area (ft2) |
N/A |
Heater: kW Range |
N/A |
Heater: Watt Density (W/in2) |
N/A |
Heater: ASME |
N/A |
Heater: Baffles |
N/A |
Heater: Standard Terminal Housing |
N/A |
Fluids: Mineral Oil (° F) |
N/A |
Fluids: Synthetic Oil (° F) |
N/A |
Fluids: Silicone Oil (° F) |
N/A |
Inter-Connecting Piping: Connections |
N/A |
Inter-Connecting Piping: Gaskets Flexitallic Flexicarb |
N/A |
Inter-Connecting Piping: Insulation with Aluminum Cover |
N/A |
Process Cooling (Parallel Design): Water to Oil Heat Exchanger |
N/A |
Process Cooling (Parallel Design): Air to Oil Heat Exchanger |
N/A |
Controls and Instruments: Temperature Indicating Control |
N/A |
Controls and Instruments: Skid Mounted Control Box |
N/A |
Controls and Instruments: Remote Mounted Control Box |
N/A |
Controls and Instruments: High Limit Set at (° F) |
N/A |
Controls and Instruments: Pump Cooling Water Low Flow Alarm |
N/A |
Controls and Instruments: SCR Power Controller |
N/A |
Controls and Instruments: Control Box Heating or Cooling |
N/A |
Drip Proof Base |
N/A |
Back Inlet & Outlet Port Location |
N/A |
Special Paint |
N/A |
Dimenso Blue Enamel Paint |
N/A |
Width (in) |
N/A 24 |
Depth (in) |
N/A 24 |
Height, not including expansion tank (in) |
N/A 50 |
Approx. Weight (lbs) |
N/A 600 |
Design Temp (° F) |
N/A 450 |
Design Pressure (psi) |
N/A 100 |
Pipe Size (150#) |
N/A 1 1/2 |
Pump/Motor: Flow (gpm) |
N/A 40 |
Pump/Motor: (hp) |
N/A 2 |
Pump/Motor: Total Delivery Head (ft) |
N/A 100 |